Every storm job is different, but the core scope covers emergency securing, water removal, drying, and the repairs that follow. Here is what is typically included when you hire us for Storm Damage Restoration in Tennessee. Anything beyond this scope gets priced and approved before we start.
We cover roof damage with tarps and close broken windows with plywood to stop water intrusion. This happens on the first visit, before any drying equipment is placed, so the structure is not taking on more water while we work.
Standing water comes out with a water extraction pump and wet/dry vacuum. We pull water from carpet, hardwood, concrete, and crawl spaces, then check with a moisture meter to confirm the bulk water is gone.
Industrial air movers and dehumidifiers run in a calculated pattern based on room dimensions and material types. We log moisture readings daily with a hygrometer and infrared thermometer and adjust equipment until the structure hits dry standard.
Affected surfaces get treated with antimicrobial spray after extraction. This slows microbial growth while the structure dries, which matters most in the first 24 to 48 hours when mold is most likely to start.
Storm debris, ruined carpet padding, saturated drywall, and unsalvageable insulation get hauled out and disposed of. We leave the work area clean so repairs can start without a second cleanup phase.
Once the structure is dry, we replace drywall, insulation, baseboards, flooring, and roofing as needed. The same crew that dried the house handles the rebuild, so you are not waiting on a separate contractor.
Storm Damage Restoration in Tennessee is the process of securing a storm-damaged home, removing water and debris, drying the structure to verified moisture levels, and repairing what the storm broke. It is not just roof patching. A single Tennessee thunderstorm can drive rain through soffits, push water under a door threshold, and leave standing water in a crawl space for days. We start with a moisture meter and thermal imaging camera to map exactly where the water traveled, then extract, dry, and document every affected material before repairs begin.
Tennessee storms hit differently depending on where you live. West Tennessee gets straight-line winds and hail that peel shingles off in sheets. Middle Tennessee sees flash flooding that backs up sump pumps and overwhelms basement drains. East Tennessee deals with tornado-spun debris and falling timber. That is why Tennessee storm damage restoration has to be planned around the actual storm, not a generic checklist. If you are searching for storm damage restoration near me after a bad night, the first 24 to 48 hours decide whether you are drying drywall or replacing it.
Every storm job follows the same five stages. Here is exactly what happens from the moment you call until the last piece of trim goes back on.
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Moisture Meter and Hygrometer
Used to measure moisture content in drywall, wood, and concrete. We take readings before, during, and after drying to confirm the structure hits dry standard.
Thermal Imaging Camera
Finds hidden water behind walls and under floors by reading temperature differences. It is how we catch storm water that does not show on the surface.
Industrial Air Mover (Dri-Eaz, Phoenix)
High-volume air movers create the airflow that evaporates moisture from wet materials. We place them in a calculated pattern based on room size and material type.
Desiccant Dehumidifier
Pulls moisture out of the air so wet materials can keep releasing water. Essential in Tennessee humidity, where open-air drying alone will not get the job done.
Water Extraction Pump and Wet/Dry Vacuum
Removes standing water from floors, carpets, and crawl spaces. We use truck-mounted and portable units depending on access and water volume.
Inspection Camera
Lets us look inside wall cavities and crawl spaces without tearing everything open. We confirm where water traveled before deciding what gets removed.
DeWalt and Milwaukee Power Tools
Used on the repair side for cutting out damaged drywall, installing new baseboards, and handling roof patching. Same crew, same tools, start to finish.
IICRC S500 Drying Standard
The S500 standard sets the drying goals and verification requirements for water-damaged structures. We follow it on every job, which means documented moisture readings and a clear dry standard instead of a guess about when the house is ready for repairs.
Xactimate Estimating
Insurance adjusters work in Xactimate. We build our scopes in the same platform so line items match what your carrier expects. That reduces back-and-forth and speeds up claim approval.
Thermal Mapping and Moisture Profiling
We combine thermal imaging with moisture meter readings to build a map of where water traveled. This catches hidden moisture in wall cavities and under flooring that a visual inspection would miss entirely.
Antimicrobial Treatment Protocol
After extraction, affected surfaces get treated with antimicrobial spray. This is a preventive step during the drying window, when mold is most likely to start growing on wet drywall and framing.
01
What we do: We dispatch a crew for emergency tarping and water extraction. The roof gets covered, the ceiling water gets pulled, and drying equipment goes in that night.
→ You wake up to a stabilized house instead of a spreading stain and a wet floor.
02
What we do: We pump out the basement, remove saturated materials, and run dehumidifiers and air movers until moisture readings hit dry standard.
→ The basement is dry and documented, and the repair scope is ready for your insurance adjuster.
03
What we do: We inspect the attic with a moisture meter and thermal camera, tarp the damaged roof sections, and dry the framing and insulation.
→ Roof patching and insulation replacement get scheduled before the next storm rolls through.
04
What we do: We board up the window, extract water from the carpet, pull wet padding, and dry the drywall and subfloor.
→ New padding, carpet, and paint go back in once the structure is verified dry.
Tennessee sits in a storm belt that produces everything from spring tornadoes to winter ice storms. West Tennessee around Memphis and Dyersburg gets straight-line winds and hail that strip shingles and drive rain sideways into walls. Middle Tennessee, including Nashville, Franklin, and Murfreesboro, deals with flash flooding when heavy rain overwhelms storm drains and sump pumps. East Tennessee around Knoxville, Maryville, and Chattanooga sees tornado-spun debris and falling timber that punch holes in roofs and walls. Building stock matters too. Older homes in established neighborhoods often have crawl spaces, original hardwood, and minimal vapor barriers, which means storm water spreads faster and dries slower. Newer construction tends to have tighter envelopes, so trapped moisture in wall cavities is harder to find without a thermal imaging camera. We adjust drying plans based on the house, not a template. If you need emergency storm damage restoration in Tennessee, call (855) 713-4896 and we will match the crew to your region.
Franklin
Older downtown homes with crawl spaces and original hardwood need slower drying to prevent cupping and finish damage.
Cordova
Suburban slab-on-grade homes here often have sump pump systems that fail during heavy rain, leading to garage and hallway flooding.
Maryville
Foothills properties see more wind-driven rain and falling limbs, so roof damage and attic intrusion are common after storms.
Dyersburg
West Tennessee hail and straight-line winds peel shingles and drive water into attic insulation before homeowners notice.
Spring tornado season across Middle and West Tennessee
Tornado-spun debris causes roof penetrations and wall damage that let water in fast. We keep crews staged for rapid tarping and board-up during active storm weeks.
High summer humidity in East Tennessee
Humidity slows evaporation, so drying takes longer and dehumidification matters more. We size desiccant dehumidifiers to the space instead of relying on air movers alone.
Winter ice storms and frozen pipe bursts
Ice dams and frozen pipes cause water intrusion that often goes unnoticed until a ceiling stains. We check attics and wall cavities with thermal imaging to find it early.
Flash flooding in low-lying Middle Tennessee neighborhoods
Storm drains back up and water enters through doors and garage slabs. We extract fast and treat affected areas as contaminated when floodwater is involved.
Storms leave behind more than visible damage. Water hides in wall cavities, crawl spaces, and under flooring, and it keeps causing problems long after the sky clears. Here are the issues we see most often and how we handle them.
Problem
Water soaks insulation, stains ceilings, and drips into living space. Left alone, it rots roof decking and feeds mold growth within two days.
Our Fix
We tarp the roof the same day, extract water from the attic and ceilings, and dry the framing with air movers and a dehumidifier. Once dry, we replace damaged insulation and drywall and patch the roof.
Problem
Standing water under the house drives humidity up through the floors, warps hardwood, and creates ideal conditions for mold and wood rot.
Our Fix
We pump the crawl space with a water extraction pump, run desiccant dehumidifiers, and check the vapor barrier for tears. We verify with moisture readings before closing the job.
Problem
A failed sump pump means basement flooding within hours. Water reaches drywall, baseboards, and stored belongings before anyone notices.
Our Fix
We extract the standing water, remove saturated baseboards and carpet padding, and dry the concrete and framing. We also flag the pump failure so you can get it replaced before the next storm.
Problem
Water gets behind trim and into wall cavities where it is invisible. By the time you see a stain, the drywall and insulation are already wet.
Our Fix
We use a thermal imaging camera to find hidden moisture, open the wall where needed, and dry the cavity. Antimicrobial spray goes on before the wall is closed back up.
Storm damage gets worse by the hour. Water wicks into insulation, subfloor, and wall cavities, and mold can start colonizing wet drywall in as little as 24 to 48 hours. Here is what you get when you call us instead of waiting on a handyman.
Same-Day Emergency Tarping
A hole in your roof or a broken window lets water pour in every time the wind shifts. We arrive with tarps, plywood, and board-up materials to stop the intrusion before we start drying. Most emergency calls in the Nashville and Memphis metros get a crew on-site within hours, not days.
Direct Insurance Documentation
We photograph every wet material, log moisture readings, and build an Xactimate-ready scope your adjuster can process. That means fewer back-and-forth calls and a faster storm damage restoration with insurance claim Tennessee homeowners actually get paid on. You get a copy of everything we send.
Drying That Passes Inspection
We dry to IICRC S500 standards and verify with a hygrometer and infrared thermometer before we pull equipment. Drywall, baseboards, and subfloor get checked, not guessed. If a wall cavity is still holding moisture, we keep the industrial air movers and dehumidifier running until the numbers say dry.
Repairs Under One Roof
Once the structure is dry, our crew handles drywall, insulation, baseboards, paint, and roof patching. You are not juggling three contractors and waiting six weeks for the drywall guy to show up. One scope, one schedule, one point of contact from tarp-over to final coat.
Typical 2026 pricing for storm damage restoration in Tennessee runs $1,800 to $8,500 for most residential jobs, with water extraction and drying alone landing between $2,200 and $4,800. Roof patching, drywall replacement, and flooring push the total higher. If your loss is covered, your out-of-pocket is usually just the deductible. We give you a written scope with line items before work starts, so you know what you are paying for and what your insurance is covering.
Typical Investment Range
$1,800 - $8,500 depending on scope
Storm damage gets more expensive the longer it sits. Drying a wet wall in four days costs far less than replacing it after mold sets in. We price the job honestly, document it for insurance, and finish the repairs so you are not paying twice.
What changes the price
Water Category and Class
Clean rainwater is Category 1 and costs less to handle. Floodwater and sewage backups are Category 3 and require removal of more materials plus antimicrobial treatment, which raises the price.
Square Footage Affected
A single room with wet carpet is a smaller job than a whole first floor with saturated drywall. Equipment count, drying time, and material replacement all scale with square footage.
Roof and Structural Damage
Tarping and patching a small roof section is quick. Replacing decking, shingles, and framing after a tree strike adds labor, materials, and time to the scope.
Mold Growth Present
If mold is found during inspection, we add containment, removal of affected materials, and treatment with mold remediation chemicals. That adds cost but prevents a bigger problem later.
Insurance Coverage
Most storm losses are covered under homeowner policies, which means your out-of-pocket is the deductible. We build the scope in Xactimate so your adjuster can process it quickly.
Google ★★★★★4.9
Called after a storm took out part of our roof. Crew was on-site the same evening with tarps and started drying that night. They handled the insurance paperwork and the repairs. Everything was done in about two weeks.
Google ★★★★★4.8
Our crawl space flooded and they pumped it out, set up dehumidifiers, and checked the vapor barrier. Moisture readings came back dry in four days. They also caught a small mold spot early and treated it.
BBB ★★★★★4.9
Straight answers from the first call. They gave us a written scope before starting, documented everything for our adjuster, and finished the drywall and paint on schedule. No surprise charges.
Our technicians hold IICRC Water Damage Restoration Technician (WRT) and Applied Structural Drying (ASD) certifications, and we carry Tennessee Contractor License coverage for the repair side of every job. We work to IICRC S500 drying standards, use Xactimate for insurance scopes, and follow EPA Lead-Safe Certification rules on pre-1978 homes. That matters in older Tennessee neighborhoods where lead paint and knob-and-tube wiring are still common. Every job gets a documented drying log, and we keep the equipment calibrated so your adjuster sees real numbers, not estimates.
We cover Tennessee storm damage restoration from the Mississippi River to the Smoky Mountains. Crews stage across multiple metros so we can reach most addresses within an hour, whether you are in a Memphis suburb or a small town in the eastern hills. If you need storm damage restoration services Tennessee-wide, call (855) 713-4896 and we will tell you who is closest.
Cordova slab-on-grade homes flood fast when sump pumps fail. We pump basements and garages, dry the concrete and framing, and document everything for your adjuster.
Franklin's older homes have crawl spaces and original hardwood that need slower drying. We tarp roofs, extract water, and dry to IICRC standards before repairs start.
Collierville sees hail and straight-line winds that strip shingles. We tarp damaged roof sections the same day and dry attic insulation and framing before mold sets in.
Foothills storms drop limbs and drive rain through roofs in Maryville. We board up, extract water, and handle drywall and insulation repairs under one scope.
West Tennessee hail and wind hit Dyersburg hard. We patch roofs, dry wet attics, and work directly with your insurance carrier to get the claim moving.
Powell storms often bring wind-driven rain through windows and doors. We use thermal imaging to find hidden moisture and dry wall cavities before closing them up.
Collegedale's wooded lots mean falling timber and roof strikes after storms. We tarp, extract, and rebuild, keeping the whole job with one crew.
Oakland's newer construction traps moisture in tight wall cavities. We use moisture meters and thermal cameras to find it and dry it before it becomes a mold problem.
Humboldt storms bring heavy rain and flash flooding. We pump crawl spaces and basements, run dehumidifiers, and verify dry standard with daily readings.
Lynchburg's rural properties can wait longer for service, so we stage crews to reach them fast. We handle tarping, extraction, drying, and repairs in one visit cycle.
Lafayette homes deal with storm runoff and crawl space flooding. We extract water, treat with antimicrobial spray, and dry the structure before rebuilding.
Bolivar sees spring storms that damage roofs and drive water into attics. We tarp, dry, and patch, keeping your insurance adjuster in the loop the whole way.
Waverly has dealt with serious flooding in recent years. We handle flood damage cleanup, extraction, and structural drying with full documentation for claims.
Etowah storms bring falling limbs and roof damage. We board up, extract water, and handle drywall and roofing repairs with the same crew.
Mascot's hillside properties see wind-driven rain and runoff. We inspect with thermal cameras, dry wall cavities, and repair storm damage before it spreads.
Real answers to the questions we hear most often from local homeowners and property managers.
Storm water that gets inside a home is water damage, and it needs the same extraction, drying, and documentation whether it came through a roof or a foundation crack. We handle both under one scope so nothing falls between the cracks.
View Water Damage RestorationStanding water after a storm needs to come out fast. We run water extraction pumps and wet/dry vacuums to pull water from floors, carpets, and crawl spaces before it wicks into the subfloor and framing.
View Emergency Water RemovalExtraction is the first physical step after a storm. We use truck-mounted and portable units to pull water from carpet, pad, hardwood, and concrete, then check with a moisture meter to confirm we got what we came for.
View Water ExtractionWhen storm flooding pushes water and debris into a home, cleanup means more than pumping. We remove silt, disinfect contaminated surfaces with antimicrobial spray, and haul out ruined materials before drying begins.
View Flood Damage CleanupTennessee storms often overwhelm sump pumps and basement drains. We pump out basements, dry the concrete and framing, and check for vapor barrier damage so the space does not stay damp after the storm passes.
View Basement Water RemovalHeavy rain can back up municipal lines into a home. Sewage carries bacteria, so we treat it as a contaminated loss, remove affected materials, disinfect, and dry with equipment rated for Category 3 water.
View Sewage Backup CleanupCall (855) 713-4896 any time, day or night. We answer live, ask a few questions about the source and the size of the loss, and dispatch the nearest crew. Most Tennessee metro calls get a truck in 60 to 90 minutes, and rural calls within two hours. You can also email [email protected] and we will call you back within 15 minutes.
Phone
(855) 713-4896Address
Tennessee
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available
