Full moisture inspection
A certified tech uses a moisture meter, thermal imaging camera, and inspection camera to map every wet area and trace the source. You get photos and a written report with affected square footage.
Licensed
Licensed & Bonded
Fully Insured
Insured & Bonded
24/7 Emergency
Same-Day Response
Warranty Backed
Workmanship Guaranteed
What our mold remediation service includes
Every job starts with a full inspection and a written scope, so you know what is covered before we touch a wall. Here is what is standard on a Water Damage Pros Tennessee mold job, and what we handle as an add-on when the situation calls for it.
Containment and HEPA filtration
We build poly containment with zipper doors and run HEPA air scrubbers to keep spores out of the rest of the house. Setup is included, and we size the scrubber count to the work zone volume.
Removal of affected materials
Moldy drywall, insulation, carpet padding, baseboards, and compromised subfloor come out and get bagged inside containment. Disposal is included in the quoted price.
Antimicrobial treatment
Exposed framing and structural surfaces get antimicrobial spray after removal. We treat the whole cavity, not just the visible spots, because spores settle where you cannot see them.
Verified structural drying
Industrial air movers and dehumidifiers run until framing hits 12 to 15 percent moisture content. We log daily hygrometer readings and give you the drying record at the end.
Documentation packet
Photos, moisture logs, equipment placement diagrams, and an Xactimate-formatted estimate go into a packet you can hand to your insurance adjuster. We also walk carriers through the scope on request.
What Mold Remediation in Tennessee actually involves
Mold Remediation in Tennessee is the controlled removal of mold growth and the moisture source behind it. That means a moisture meter and thermal imaging camera to find hidden water, negative-air containment to keep spores out of your living space, HEPA filtration, and physical removal of affected drywall, insulation, and carpet padding. We treat framing with antimicrobial spray, then dry the cavity with industrial air movers and dehumidifiers until readings match a dry standard. No fog-and-paint shortcuts.
Tennessee homes grow mold fast because our summers run humid and our winters swing between 20-degree nights and 60-degree afternoons. A burst pipe in Memphis, a slab leak in Nashville, or a crawl space that stays damp all year gives mold everything it needs within 24 to 48 hours. That is why homeowners search for mold removal Tennessee help at 2 a.m. after a roof leak. We stop the water, then we stop the mold.
Our mold remediation process, step by step
Every job follows the same five stages, whether it is a 40-square-foot closet in Gallatin or a flooded crawl space in Ripley. Here is what you will see from us.
01
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
02
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
03
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
04
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Tools and methods we use on every job
Tools & Equipment
Moisture meter
Reads moisture content in drywall, framing, and subfloor so we know exactly where the water is and when the structure is dry.
Thermal imaging camera
Shows temperature differences behind walls and under floors, which reveals hidden moisture without tearing anything open.
HEPA air scrubbers
Filters airborne spores inside containment and keeps the rest of your home clean during removal and drying.
Industrial air movers
Dri-Eaz and Phoenix Restoration Equipment units push high-volume air across wet surfaces to speed evaporation.
Dehumidifiers
Pulls moisture out of the air so wet materials can actually dry instead of reabsorbing humidity.
Hygrometer
Tracks relative humidity in the work zone so we can confirm drying progress day by day.
Inspection camera
Lets us look inside wall cavities and crawl spaces without unnecessary demolition.
Methods & Standards
IICRC S520 mold remediation standard
The industry standard for assessing and remediating mold. We follow its containment, removal, and clearance procedures on every job, which is what makes the work defensible to insurers and future buyers.
Negative air containment
We seal the work zone with poly and run HEPA scrubbers to create negative pressure. Air flows into the containment, not out of it, so spores never reach your living space.
Verified structural drying
We log hygrometer and moisture meter readings daily and do not pull equipment until framing reads 12 to 15 percent. That verification is what keeps mold from coming back.
Xactimate documentation
Estimates are formatted in Xactimate, the same platform most carriers use. That means your adjuster can review the scope line by line without back-and-forth.
When to call for mold remediation
01
You smell a musty odor in a room but cannot see any visible growth on the walls or ceiling.
What we do: We run a moisture meter and thermal imaging camera across the room to find hidden water behind drywall or under flooring. If growth is confirmed, we contain, remove, and dry. If not, we tell you what the smell actually is.
→ You get a straight answer and a written scope, or a clean bill of health with no unnecessary work.
02
A pipe burst over the winter and you dried it with fans and towels but did not call anyone.
What we do: We inspect the cavity with an inspection camera and moisture meter. If readings are elevated, we set up containment, remove any moldy material, and run professional drying equipment to a verified dry standard.
→ Mold that would have appeared weeks later gets caught and removed before it spreads.
03
You are buying or selling a Tennessee home and the inspection report flags mold in the crawl space.
What we do: We scope the crawl space, document affected square footage with photos, and provide a written remediation estimate the buyer and seller can both work from. Work can be scheduled around closing.
→ The transaction moves forward with a clear number instead of a vague contingency.
04
A storm pushed water under your siding and the interior wall now shows dark staining near the baseboard.
What we do: We trace the water path, open the wall inside containment, remove moldy drywall and insulation, treat the framing, and dry the cavity. We also check whether the exterior leak needs repair before we close up.
→ The wall is clean, dry, and ready for paint, and the water source is addressed so it does not happen again.
How mold remediation runs in Tennessee
Tennessee is a mold state. Summers push humidity into the 70s and 80s, and our winters swing hard enough to freeze pipes in Mountain City one week and thaw them in Memphis the next. That freeze-thaw cycle is behind a huge share of the burst pipe and slab leak calls we run. Older housing stock in places like Greeneville and Shelbyville often has no vapor barrier under the crawl space, so ground moisture rises into the joists year-round. Newer construction is tighter, which means a roof leak in a Gallatin attic traps moisture instead of venting it. We size drying equipment for Tennessee humidity, not a dry-climate rule of thumb, and we check crawl spaces first because that is where mold starts in most homes here. If you are searching for mold removal near me and you are anywhere from Ripley to Blaine, we can get a crew out.
Neighborhoods We Serve
-
Downtown Memphis
Older homes and commercial buildings with original plumbing. Slab leaks and cast iron drain failures are common mold sources here.
-
Historic Gallatin
Pre-1940 housing stock with pier-and-beam foundations. Crawl space moisture and vapor barrier gaps drive most of our mold calls.
-
Morristown
Mix of mid-century homes and newer builds. Attic roof leaks after summer storms are the most frequent source of hidden growth.
-
Shelbyville
Rural properties with detached structures and outbuildings. We often remediate mold in shops, barns, and converted garages as well as main homes.
Local Conditions We Plan For
-
High summer humidity across the state
Interior spaces stay above 60 percent relative humidity for months, which is enough to feed mold on drywall and framing even without a visible leak. We run dehumidifiers longer here than in drier climates.
-
Winter freeze-thaw cycles
Pipes in exterior walls and unheated crawl spaces freeze and burst, then thaw and soak insulation. These are the calls that turn into mold jobs if drying is delayed.
-
Older housing without vapor barriers
Ground moisture rises into crawl space joists and subfloor year-round. Installing a vapor barrier is often the single most effective step to stop mold from returning.
-
Storm-driven roof and siding leaks
Wind-driven rain gets behind siding and under shingles, soaking wall cavities and attic insulation. We see a spike in these calls after every spring and fall storm system.
Memphis slab leak and hallway mold
Mold problems we solve for Tennessee homeowners
Mold shows up in different places depending on the house, the season, and where the water came from. These are the calls we run most often across the state.
Problem
Crawl space stays damp year-round
Joists and subfloor grow mold that spreads into living space, and the musty smell never goes away no matter how much you ventilate.
Our Fix
We pump out standing water, remove moldy joists or subfloor sections, treat framing with antimicrobial spray, and install a vapor barrier to keep ground moisture out. Most crawl space jobs dry in four to six days with dehumidifiers running.
Problem
Roof leak soaked attic insulation
Wet insulation holds moisture against the roof deck, and mold spreads across sheathing and rafters within a week. Left alone, it rots the structure.
Our Fix
We remove saturated insulation, treat the deck and rafters, and dry the attic cavity with air movers. If sheathing is compromised, we cut it out and coordinate replacement so the roof can be closed up correctly.
Problem
Burst pipe behind a bathroom wall
Water wicks into drywall and baseboards and mold appears within 48 hours. Homeowners often only notice when they smell it or see staining.
Our Fix
We open the wall inside containment, remove moldy drywall and insulation, treat the framing, and dry the cavity. A typical bathroom wall remediation runs two to three days of work plus four days of drying.
Problem
Sewage backup in a finished basement
Category 3 water carries bacteria, and the damp aftermath is a perfect mold incubator. Carpet, pad, and lower drywall usually have to go.
Our Fix
We handle the hazardous cleanup first, disinfect the space, then remove affected materials and dry the block walls and floor. We do not start drying until the surface is sanitized.
Why Tennessee homeowners call us first
Mold does not wait for a convenient week. Every day it spreads, the remediation scope grows and the bill grows with it. Here is what you get when our crews roll in.
-
Same-day moisture mapping
We arrive with moisture meters, a thermal imaging camera, and an inspection camera to trace the water to its source. You get a written scope with affected square footage, a drying plan, and a price before any demolition starts. Most inspections take 45 to 90 minutes.
-
Containment that protects your family
We build 6-mil poly containment with zipper doors and run HEPA air scrubbers so spores stay in the work zone. Kids, pets, and furniture stay clean. On a typical 200-square-foot bathroom remediation, we run two scrubbers and achieve four air changes per hour.
-
Drying verified to IICRC standards
Our IICRC Applied Structural Drying (ASD) techs log daily hygrometer readings and do not pull equipment until framing hits 12 to 15 percent moisture content. That verification is what keeps mold from returning three weeks after we leave.
-
Insurance paperwork handled
We document with photos, moisture logs, and Xactimate-formatted estimates, so your adjuster has what they need on the first submission. Most covered claims for mold remediation after water damage Tennessee homeowners file get approved faster when the drying record is complete.
What mold remediation costs in Tennessee
Mold remediation pricing in Tennessee depends on how much area is affected, what materials have to come out, and how long drying takes. Typical 2026 residential jobs run $1,200 to $6,500, with small contained areas starting around $800 and full crawl space or attic projects reaching $8,000 or more. We quote from a written scope, not a phone guess, so the number you see is the number you pay unless you approve a change. If you want mold remediation services Tennessee wide with honest pricing, start with an inspection.
Typical Investment Range
$800 - $8,000+ depending on scope, with most residential jobs landing between $1,200 and $6,500
You are paying for verified drying, proper containment, and documentation that holds up to insurance review and future home inspections. Cutting corners on any of those three is how mold comes back.
What changes the price
01
Affected square footage
Price scales with the area of mold growth. A 40-square-foot closet is a different job than a 400-square-foot basement. We measure and document square footage during the inspection so the scope is exact.
02
Materials that must be removed
Drywall and insulation come out relatively quickly. Subfloor, cabinetry, and finished trim add labor and disposal cost. We tell you upfront what has to go and what can be saved.
03
Drying time required
Tennessee humidity stretches drying timelines. A job that dries in three days in a dry climate may take five here. Equipment rental and monitoring time are part of the quote.
04
Access and containment complexity
A crawl space with a tight hatch is harder to work in than an open basement. Multi-room containment and negative air setups add labor but protect the rest of your home.
05
Source repair needed
If a burst pipe, slab leak, or roof leak is still active, it has to be fixed before remediation makes sense. We coordinate with plumbers and roofers so the fix happens in the right order.
06
Insurance coverage
When the mold traces to a covered event, your carrier may pay most of the cost. We provide Xactimate-formatted documentation to make the claim process straightforward.
Licensed, certified, and accountable
Licensed & Certified
- IICRC Water Damage Restoration Technician (WRT) — issued by Institute of Inspection, Cleaning and Restoration Certification
- IICRC Applied Structural Drying (ASD) — issued by Institute of Inspection, Cleaning and Restoration Certification
- IICRC Mold Remediation Technician (MRT) — issued by Institute of Inspection, Cleaning and Restoration Certification
- ACAC Council-certified Microbial Remediator (CMR) — issued by American Council for Accredited Certification
- EPA Lead-Safe Certification — issued by U.S. Environmental Protection Agency
Verified Reviews
Google ★★★★★4.9
Called after a roof leak soaked our attic. They had containment up the same day and dried the space in five days with daily readings. The documentation packet made our insurance claim painless. Would call again without hesitation.
Yelp ★★★★★4.8
Crawl space was a mess from years of moisture. They pumped it out, laid vapor barrier, and treated the joists. Honest pricing and no upsell. The musty smell is finally gone from the house.
BBB ★★★★★4.9
Burst pipe behind the bathroom wall led to mold we did not see for weeks. The tech found it with a thermal camera and gave us a written scope before any demo. Stuck to the quoted price.
Google ★★★★★5.0
Storm pushed water under our siding and mold showed up near the baseboard. They opened the wall inside containment, removed the bad drywall, and dried it out. Clean work, no mess left behind.
Certified crews who do this every day
Our technicians hold IICRC Water Damage Restoration Technician (WRT), Applied Structural Drying (ASD), and Mold Remediation Technician (MRT) credentials, plus ACAC Council-certified Microbial Remediator (CMR) oversight on complex jobs. We carry Tennessee Contractor License coverage, OSHA 10-Hour Construction training, and EPA Lead-Safe Certification for pre-1978 homes. That matters in older Tennessee neighborhoods where lead paint and mold show up in the same wall cavity. We work with DeWalt, Milwaukee, and RIDGID tools, Dri-Eaz and Phoenix Restoration Equipment for drying, and Xactimate for insurance documentation. Local experience across hundreds of Tennessee properties means we know how this climate grows mold and how to stop it.
- IICRC WRT, ASD, and MRT certified technicians on every mold job
- ACAC Council-certified Microbial Remediator oversight for large or complex losses
- EPA Lead-Safe Certification for pre-1978 Tennessee housing stock
- Xactimate Certified estimating for smooth insurance claim submissions
- OSHA 10-Hour Construction training on every crew member
Cities we serve for mold remediation in Tennessee
Our crews run out of multiple hubs across the state, so mold removal Tennessee wide is not a marketing line, it is how we operate. From the Mississippi River to the Appalachian foothills, we handle crawl spaces, attics, basements, and wall cavities in every kind of Tennessee home. Here are a few of the communities we serve regularly.
Memphis
Older housing stock and slab leaks make Memphis a steady mold market. We handle crawl space, wall cavity, and commercial remediation across the metro.
Morristown
Summer storms and roof leaks drive most Morristown mold calls. We tarp, extract, and remediate attic and wall growth in the same visit when possible.
Gallatin
Historic homes with pier-and-beam foundations need crawl space attention. We install vapor barrier, treat joists, and dry to a verified standard.
Shelbyville
Rural properties often include outbuildings and shops. We remediate mold in main homes, converted garages, and detached structures alike.
Greeneville
East Tennessee humidity keeps crawl spaces damp. Our crews pump out water, treat framing, and set up long-term moisture control.
Portland
Freeze-thaw winters burst pipes in exterior walls here. We open the wall inside containment, remove moldy material, and dry the cavity.
Millington
Storm-driven water under siding is common in Millington. We trace the leak path, remediate the wall, and coordinate exterior repair.
Winchester
Attic roof leaks after spring storms are our most frequent Winchester call. We remove wet insulation, treat sheathing, and dry the space.
Ripley
Crawl space moisture and older plumbing keep Ripley crews busy. We handle full crawl space remediation and vapor barrier installation.
Munford
Newer construction traps moisture when leaks happen. We find hidden water with thermal imaging and remediate before growth spreads.
Dunlap
Sequatchie Valley humidity feeds mold in crawl spaces and basements. We dry to a verified standard and document every reading.
Sparta
Older homes and wet basements are common in Sparta. We remove affected materials, treat framing, and set up moisture control.
Apison
Storm damage and roof leaks bring mold calls from Apison. We contain, remove, and dry, then hand off rebuild to our own crews.
Jasper
Marion County humidity and older housing stock mean crawl space work. We pump out water, treat joists, and install vapor barrier.
Blaine
Rural Grainger County properties often have damp crawl spaces and outbuildings. We remediate both and document for insurance.
Frequently Asked Questions
Real answers to the questions we hear most often from local homeowners and property managers.
How much does mold remediation cost in Tennessee?
Most residential jobs in Tennessee run $1,200 to $6,500 in 2026, with small contained areas starting around $800 and full crawl space or attic projects reaching $8,000 or more. Price depends on affected square footage, whether drywall or insulation has to come out, and how many days of drying are needed. We give you a written scope with the price before demolition starts.
Does insurance cover mold remediation in Tennessee?
Yes, when the mold traces back to a covered event like a burst pipe, roof leak, or appliance failure. Most Tennessee policies exclude mold that grew from long-term neglect or repeated seepage. We document the moisture source with photos and readings so your adjuster can see the cause, and we bill carriers directly on approved claims.
How long does mold remediation take?
A single contained room usually takes two to four days of work plus three to five days of drying. Whole-home jobs or crawl space mold remediation Tennessee projects often run one to two weeks. We log moisture readings daily and do not pull equipment until framing reads 12 to 15 percent, so the timeline is driven by real numbers, not guesswork.
Can I stay in my house during remediation?
In most cases yes, as long as the containment is sealed and you stay out of the work zone. If growth covers a large area, if sewage was involved, or if anyone in the home has asthma or a compromised immune system, we will tell you honestly that temporary relocation is the safer call. We set up containment to keep spores out of your living space either way.
Related Services
Water Damage Restoration
Mold almost always starts with water. Our restoration crews extract, dry, and repair the structure, then hand off to the mold team if growth has already started. One call covers both.
View Water Damage RestorationEmergency Water Removal
When a pipe bursts at 2 a.m., every hour counts. We pull standing water fast, which shuts down the moisture that mold needs to colonize within 24 to 48 hours.
View Emergency Water RemovalWater Extraction
Truck-mounted and portable extraction pulls water out of carpet, pad, and subfloor. Getting it out fast is the single biggest factor in whether mold ever develops.
View Water ExtractionFlood Damage Cleanup
Floodwater carries contaminants and often leaves behind damp cavities that grow mold within days. We clean, sanitize, and dry so the rebuild starts on a clean surface.
View Flood Damage CleanupBasement Water Removal
Tennessee basements stay damp from sump pump failure and foundation seepage. We remove the water, dry the block, and address the moisture that feeds basement mold.
View Basement Water RemovalSewage Backup Cleanup
Category 3 water requires full disinfection before any drying. We handle the hazardous cleanup, then treat and dry the space so mold does not take hold in the aftermath.
View Sewage Backup CleanupGet a Crew Out Today
Call (855) 713-4896 any time, day or night. We answer live, ask a few questions about the source and the size of the loss, and dispatch the nearest crew. Most Tennessee metro calls get a truck in 60 to 90 minutes, and rural calls within two hours. You can also email [email protected] and we will call you back within 15 minutes.
Water Damage Pros Tennessee
-
Phone
(855) 713-4896 -
Address
Tennessee
-
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available